6 Inch Bench Grinder 370W with Twin Grinding Wheels

Product detail

Bench grinder with twin 150 mm wheels for sharpening, deburring and light surface work at a fixed station. The 370 W motor runs at 3000 r/min, holding wheel speed steady when a blade or chisel is pressed against it, and the cast base can be bolted to a workbench so the machine does not walk under load. Each wheel is covered by a pressed-steel guard, and the wheels themselves measure 150 x 20 x 32 mm, the common size for replacements in most markets. The machine runs on 220 V at 50 Hz, draws 1.7 A, and weighs 12 kg, so one person can move it between benches. Suited to workshop sharpening stations, tool rooms, fabrication shops and maintenance bays. Supplied as a single machine. The machine is a practical line for a tool distributor to list beside wheels, stands and eye protection, so a workshop can buy the grinder and the parts it needs in one order. Farms, workshops and maintenance bays keep a bench grinder for sharpening, deburring and touching up a chisel or a drill bit; twin wheels let one side stay coarse and the other dressed finer without changing stones mid-job. Because the base can be bolted down, the machine can be left set with one wheel for a job that recurs and the other swapped for a wire or polishing wheel when the work changes, so a bench is not tied up with one task. The 150 x 20 x 32 mm wheels are the common replacement size, so a new stone can be ordered from a wheel supplier rather than a machine specialist and the grinder is not idle while a special size is on order.