Manual Hand Rivet Gun for Blind Rivets (Industrial Grade)
Key points
- Optimised linkage multiplies hand force so each rivet sets with less effort
- Four nosepieces cover 2.4, 3.2, 4.0 and 4.8 mm blind rivets
- Cast iron body takes the leverage load without flexing
- Only 0.41 kg, so it can be worked one-handed in awkward positions
- Gutter and cladding crews can carry the gun in a tool bag for the odd fixing on a repair visit, so a small job is finished without unpacking the air line
- Hand operation needs no compressor or air line, so the gun goes where a hose will not reach
| Type | Manual Hand Rivet Gun |
| Rivet Sizes | 2.4 / 3.2 / 4.0 / 4.8 mm |
| Nosepieces | 4 Interchangeable Heads |
| Body Material | Cast Iron |
| Net Weight | 0.41 kg |
| Operation | Single-Hand Lever Action |
| MOQ | 1 pc |
| Price basis | FOB China |
| Payment | T/T bank transfer |
| Packing | Export carton with moisture-resistant packing |
| Sample | Available before a bulk order |
| Lead time | Confirmed in your quotation |
Product detail
Compact hand rivet gun for blind rivets, driven purely by hand so it needs no air line or power supply and can be carried anywhere on site. The cast iron body carries the leverage load, and the optimised linkage multiplies hand force at the jaws, so setting a rivet takes noticeably less effort than with a plain lever tool. Four interchangeable nosepieces cover the common blind rivet diameters of 2.4 mm, 3.2 mm, 4.0 mm and 4.8 mm, which is enough for sheet metal, ducting, gutters, signage and light fabrication. At 0.41 kg and a compact length the tool can be worked one-handed in awkward positions, and the spring-loaded jaw releases the mandrel cleanly instead of dropping it on the work. A practical starter tool for installers, workshops and maintenance teams pulling a handful of rivets a day. Trailer and bodywork builders joining panels with 4.8 mm rivets can keep the gun at the bench for touch-up work between powered assembly runs. Maintenance crews and sheet-metal shops keep a hand rivet gun for one-off repairs where running a compressor and hose is more work than the joint itself; the industrial-grade body takes repeated squeezes without the jaw slipping on the mandrel.
