Masonry Wall Hole Saw, Square Shank (35 mm, 330 mm Long)
Key points
- 330 mm long body and 58 mm working depth reach through single-skin walls
- Square shank seats in a rotary hammer without an adapter
- Open barrel clears dust as the hole is cut, run dry without water
- Supplied with knitted gloves for handling the gritty cut edge
- The square shank takes the hammer's rotation, so the cutter does not slip in the chuck
| Cutter Diameter | 35 mm |
| Overall Length | 330 mm |
| Working Depth | 58 mm |
| Shank | Square |
| Suitable Walls | Foam Block, Mixed Brick, Red Brick, Concrete |
| Included | 1 Pair Knitted Gloves |
| MOQ | 1 pc |
| Price basis | FOB China |
| Payment | T/T bank transfer |
| Packing | Export carton with moisture-resistant packing |
| Sample | Available before a bulk order |
| Lead time | Confirmed in your quotation |
Product detail
A long masonry core bit for drilling through a finished wall to pass a pipe, a cable or a vent. The cutter head is 35 mm across, the overall length is 330 mm and the usable working depth is 58 mm, enough to break through a single-skin brick or block wall and reach the cavity behind it. The shank is square, so the bit seats in a rotary hammer without a separate adapter, and the open barrel clears dust as the hole is cut. The cutter is intended for foam block, mixed brick, red brick and concrete block, and it is run dry without water. A pair of knitted gloves is supplied with the bit, which matters because the cut leaves a sharp, gritty edge on the outside face of the wall where the hand goes to steady the drill. Used for air-conditioning and extractor ducts. A cutter for running a vent or conduit through a brick wall, where the open barrel clears dust as the hole is cut.
