Pneumatic Air Pressure Regulator with Gauge (1/4 inch)
Key points
- Sets a steady working pressure for air tools and spray guns
- 1/4 inch inlet and outlet match common air line fittings
- Adjustment range 0.5 to 9.0 kgf/cm2 with a locking ring
- Supplied with a pressure gauge and mounting bracket
- Spray booths and tyre bays can lock one line to the pressure the job needs, so an operator does not reset the whole workshop to change a tool
- Compressor rooms can keep a spare regulator on the shelf, so a failed unit is swapped without a line staying down
- Gauge and bracket ship with the unit, so a line is set up and read without waiting on a separate gauge order
- A 9.9 kgf/cm2 maximum leaves headroom above the 9.0 kgf/cm2 working range, so the unit is not run at its limit on a line that creeps up
| Port Thread | 1/4 inch (Inlet & Outlet) |
| Max Pressure | 9.9 kgf/cm2 |
| Adjustment Range | 0.5 - 9.0 kgf/cm2 |
| Includes | Pressure Gauge & Mounting Bracket |
| Body | Black Housing with Red Lock Ring |
| MOQ | 1 pc |
| MOQ | 1 pc |
| Price basis | FOB China |
| Payment | T/T bank transfer |
| Packing | Export carton with moisture-resistant packing |
| Sample | Available before a bulk order |
| Lead time | Confirmed in your quotation |
Product detail
Pneumatic pressure regulator that holds a steady working pressure on an air line, so spray guns, blow guns, sanders and other air tools run at the setting the job needs instead of full tank pressure. Inlet and outlet ports are both 1/4 inch, matching common air line fittings and hose tails. Maximum inlet pressure is 9.9 kgf/cm2 and the adjustment range runs from 0.5 to 9.0 kgf/cm2, set by turning the top knob and fixed with the red lock ring once dialled in. The gauge and mounting bracket come with the regulator, so it can be set on a wall, a bench or a compressor panel and read at a glance. A practical spare and upgrade item for spray booths, tyre shops, workshops and compressor rooms. Holding a line at a set pressure protects the tools downstream, since a blow gun or sander run above its working range wears seals and bearings early, and that keeps repair work off the maintenance list. Because the gauge and the mounting bracket are in the box, a line can be set up and read on the spot rather than waiting on a separately ordered gauge, which is the part most often missing when a regulator is fitted at short notice. The red lock ring also holds a setting against the vibration of a running compressor or air tool, so a spray gun or a sander does not drift off pressure part-way through a panel. Spray, blow-off and air-tool lines run at a steady pressure when a regulator sits at the point of use; the gauge lets a fitter set a tool to its working pressure instead of running everything from tank pressure and wearing the tool out.
