Portable Belt Sander 810 W (76 x 457 mm Belt, 220 V)

Product detail

Belt sander for flattening panels, doors and boards and for stripping a finish before refinishing. The 810 W copper-wound motor runs a 76 x 457 mm belt at 250 m/min, so a door face or a table top is levelled in a few passes instead of being worked over with a small orbital sander. The machine can be used handheld or inverted on a bench, which turns it into a compact stationary linisher for edges and end grain. Belt changes are tool-free with a single release lever and the tracking knob is adjusted by hand, so a torn belt is swapped without hunting for an Allen key. The enlarged 170 x 200 mm base plate keeps the belt flat against the work and a double switch with a separate safety button prevents an accidental start. A washable dust bag collects the sanding dust. Consumable belts and the dust bag are simple items to re-stock, so a workshop can keep the machine running while the rest of a job continues. A supervisor can hand the sander to a less experienced pair of hands for flatting work, since the wide plate steadies the tool on the panel. Joiners flatten a glued panel and remove planing marks with a belt sander because the long belt keeps the surface flat instead of dipping; the motor holds speed under load on hardwood. Inverted on the bench, a narrow edge or an end grain can be worked against the moving belt with both hands on the part rather than on the machine, which is the safer way to true a small component. The dust bag washes out and goes back on, so extraction does not become a consumable line and a workshop is not held up waiting on bags.