Portable Pressure Sandblast Pot 5 Gal (Wheeled)
Key points
- Pressure-fed grit cuts rust and mill scale faster than a siphon gun
- Regulator valve trims pressure to suit the abrasive in the tank
- Rolls on directional casters and parks beside the job
- Packs to 67.5 x 40 x 35 cm for transport between sites
| Model | FF-Q901 |
| Tank Volume | 5 Gal |
| Working Pressure | 60 - 125 PSI |
| Air Consumption | 6 - 25 CFM |
| Wheels | 2 inch / 6 inch Directional Casters |
| Packing Size | 67.5 x 40 x 35 cm |
| MOQ | 1 set |
| Price basis | FOB China |
| Payment | T/T bank transfer |
| Packing | Export carton with moisture-resistant packing |
| Sample | Available before a bulk order |
| Lead time | Confirmed in your quotation |
Product detail
A wheeled pressure blaster for stripping rust, mill scale, paint and oxide from steel before it is coated or welded. The 5 gallon tank is filled with abrasive and pressurised from a workshop compressor, then discharged through the hose and blasting gun, which cuts far faster than a siphon gun because the grit leaves the nozzle at full line pressure rather than being pulled through by vacuum. Working pressure runs from 60 to 125 PSI at 6 to 25 CFM, which covers a small single-phase compressor up to a proper shop unit. The tank sits on a tubular frame with 2 inch and 6 inch directional casters, so it rolls around a yard or workshop and parks beside the job. A regulator valve on the inlet lets the operator dial the pressure to the abrasive in use, and the whole unit packs down to 67.5 x 40 x 35 cm for transport or storage between jobs. A pot for a maintenance crew stripping a gate or a trailer on site, where the whole unit rolls to the work instead of the parts coming to a booth.
