T50 Pneumatic Straight Nail Gun, 10-50 mm
Key points
- Handles 10-50 mm T50 straight nails for trim, beading and crates
- Side-load magazine refills without lifting the gun off the work
- Contact safety nose prevents firing unless the muzzle is pressed down
- Rotating exhaust keeps oil mist away from the operator's face
| Nail Length | 10 - 50 mm |
| Nail Type | T50 Straight Nail / Brad |
| Magazine | Side-Load with Visibility Window |
| Body | Die-Cast Aluminium |
| Air Inlet | 1/4 in |
| Firing | Contact Safety, Single or Bump Fire |
| MOQ | 1 pc |
| Price basis | FOB China |
| Payment | T/T bank transfer |
| Packing | Export carton with moisture-resistant packing |
| Sample | Available before a bulk order |
| Lead time | Confirmed in your quotation |
Product detail
A T50 pneumatic straight nail gun for 10-50 mm brads and straight nails, aimed at panelling, beading, drawer bottoms, crate assembly and light trim work where a hammer would split the timber. The die-cast aluminium body keeps the tool light enough for overhead work, and the side-load magazine refills without taking the gun off the workpiece. A contact safety nose only fires when the muzzle is pressed down, and the trigger can be set for single shot or bump firing depending on the run. The exhaust rotates so air is directed away from the face. Air inlet is 1/4 inch; the tool runs from a small compressor at workshop pressure. A magazine window shows the remaining nail count, which saves dry firing on a long run of beading. Supplied one piece; nails are not included. Use 10-50 mm T50 straight nails and add two or three drops of air tool oil before each shift.
