SD-L255 Cordless Rebar Tier (12 V, 2-25 kgf.cm)
Key points
- Wraps and twists tie wire in one pass instead of pliers and a reel
- Torque adjusts from 2 to 25 kgf.cm for light mesh and heavy cage work
- Two hooks at 80 and 130 mm reach different bar spacing
- Kit ships with battery and charger, so it ties on the day it arrives
| Model | SD-L255 |
| Battery | 12 V 1300 mAh |
| Output Torque | 2 - 25 kgf.cm |
| No-Load Speed | 1400 rpm |
| Tie Hooks | 2 pcs, 80 + 130 mm, 5 mm |
| Screw Range | 2 - 5 mm |
| MOQ | 1 kit |
| Price basis | FOB China |
| Payment | T/T bank transfer |
| Packing | Export carton with moisture-resistant packing |
| Sample | Available before a bulk order |
| Lead time | Confirmed in your quotation |
Product detail
The SD-L255 is a hand-held cordless rebar tier that wraps and twists tie wire around reinforcing bar in a single pass. A 5 mm hook draws wire from a coil and the tool spins it at 1400 rpm no-load, with output torque adjustable from 2 to 25 kgf.cm so light mesh and heavy cage work are both tied without crushing the wire or leaving a loose twist. It runs on a 12 V 1300 mAh pack, and the kit arrives with one battery, one charger and two tie hooks at 80 mm and 130 mm for reaching into different bar spacing. The body is rated for 2 to 5 mm screws as well, so it earns its place outside the reinforcement phase. On a slab or a column cage the tool takes over from hand pliers and a wire reel, which is where most of the time goes on a reinforcement package, and the twist tension stays consistent from the first tie to the last. A tier for a steel fixer working a slab, where the cordless tool wraps and twists in one pass instead of a loop of wire and a hook.
