Handheld Electric Paddle Mixer 2100W with Six-Speed Control

Product detail

Handheld electric paddle mixer for blending putty, cement, mortar, tile adhesive, paint, coatings, feed and ink in the bucket. The 2100 W motor and six-speed control let the operator slow the paddle for a splatter-free start and then open it up for thick, high-fill mixes that would stall a drill-mounted whisk. The long shaft keeps hands and the machine clear of the bucket rim, and the steel paddle reaches the bottom of a full mixing bucket. Copper motor windings and an aluminium gearbox housing with three-stage reduction carry the load through long pours. Suited to plasterers, screed and render crews, tiling contractors, decorators and small batching operations. The twin side handles and trigger give a two-handed grip on the housing rather than on the shaft, so a full bucket can be worked without the machine twisting in the hand. Supplied as a single machine. Running a steady speed through a full bucket gives a mix that wets out evenly, so a batch is less likely to be knocked back with extra powder or water after it has been poured. Plasterers and screed crews mix with a paddle because a drill burns out under the torque of a full bucket; the six-speed control lets the operator slow the paddle for a thick mix and open it up for paint or adhesive. Driving the paddle through a three-stage gearbox instead of a drill chuck means a stiff mix is held at a steady speed rather than stalling whenever the load rises, so a screed or tile adhesive batch is mixed out in one pass. A tiling or plastering crew can also mix at the point of use in the room being worked, which avoids carrying a full bucket through a finished part of the building.