304 Stainless Steel Frameless Glass Door Clamp

Two-hole square clamp for frameless glass doors and fixed shower screens, cut from 304 stainless steel with a mirror-polished face. The clamp body measures 45 mm by 45.5 mm with a 25 mm wide fixing face, letting the bracket bolt through a drilled glass panel and hold it against a wall or a second pane. It accepts glass from 8 mm to 12 mm thick, which covers the standard 8 mm, 10 mm and 12 mm shower and partition specifications, and the jaw is lined with a compressible gasket so the tightening load is spread and the glass edge is cushioned rather than pinched. A 2.9 mm wall keeps the fitting flat and flush with no visible fasteners once installed. A matching cover plate hides the fixing screws. Sold per piece, commonly ordered in sets of two or four for a fixed or hinged door.